IF SAW Filter
Part Number Package Application Last Modified
813-SL300.0M-02 13.3 x 6.5 SMD IF SAW Filter January 2011

PART NUMBER :
813-SL300.0M-02

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) - 300.0 - MHz
Insertion Loss at Fo - 17.5 - dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Temperature Coefficient - -0.03 - ppm/C
Amplitude Ripple - 1.0 1.5 dBp-p
1dB Bandwidth 2.0 2.54 - MHz
3dB Bandwidth 3.0 3.66 - MHz
40dB Bandwidth - 9.74 11.0 MHz
Relative Attenuation: -
Lower Sidelobe 50 55 - dB
Upper Sidelobe 50 55 - dB
Absolute Delay at Fo - 0.509 1.2 us
Group Delay Variation - 150 200 ns
Ambient Temperature - 25 - C
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL300.0M-02

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map