IF SAW Filter
Part Number Package Application Last Modified
813-SL160.0M-10 13.3 x 6.5 SMD Low-Loss 160MHz January 2011

PART NUMBER :
813-SL160.0M-10

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) - 160.0 - MHz
Insertion Loss at Fo - 9.7 12.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Temperature Coefficient - -94 - ppm/C
Amplitude Ripple - 0.8 1.0 dBp-p
-1.0 dB Bandwidth 9.5 9.8 - MHz
-3.0 dB Bandwidth 10.3 10.6 - MHz
-40.0 dB Bandwidth - 13.6 14.5 MHz
Relative Attenuation: -
Lower Sidelobe
40 50 - dB
Upper Sidelobe
40 43 - dB
Absolute Delay at Fo - 0.91 - us
Group Delay Variation - 55 150 ns
IN/OUT Return Loss at Fo - - - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL160.0M-10

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map