IF SAW Filter
Part Number Package Application Last Modified
813-SL125.0M-28 13.3 x 6.5 SMD Low-Loss 125MHz January 2011

PART NUMBER :
813-SL125.0M-28

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency (Fo) - 125.0 - MHz
Insertion Loss at Fo - 15.5 17.0 dB
Source Impedance (single ended)* - 50 - ohm
Load Impedance (single ended)* - 50 - ohm
Temperature Coefficient - -94 - ppm/C
Amplitude Ripple fo+/-13.0MHz - 0.4 1.0 dBp-p
1dB Bandwidth 27.5 28.5 - MHz
3dB Bandwidth 28.5 29.5 - MHz
40dB Bandwidth - 33.3 34.5 MHz
Relative Attenuation: -
40 47 - dB
40 47 - dB
Absolute Delay at Fo - 0.85 - us
Group Delay Variation fo +/-13.0 MHz - 25 50 ns
IN/OUT Return Loss at Fo - - - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I, J, L Ground
K In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
813-SL125.0M-28

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map