IF SAW Filter
Part Number Package Application Last Modified
809-IF85.38M-G 9.1 x 4.8 SMD Mobile Communication Jan. 01, 2007
TYPE :
85.38 MHz IF SAW Filter

PART NUMBER :
809-IF85.38M-G
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency - 85.38 - MHz
Insertion Loss at Fo - 9.6 12.5 dB
Attenuation Fo +630 kHz - 3.8 5.0 dB
Attenuation Fo -630 kHz - 3.8 5.0 dB
Attenuation Fo +900 kHz 33 41 - dB
Attenuation Fo -900 kHz 33 44 - dB
Attenuation Fo +1.7 MHz 35 43 - dB
Attenuation Fo -1.7 Mhz 35 42 - dB
Source Impedance (Single Ended)* - 50 - ohm
Load Impedance (Single Ended)* - 50 - ohm
Substrate Material - Quartz - -
Passband Ripple at Fo + 300 kHz - 0.7 1.2 dB
* With Matching Network (Ref. Testing Environment Circuit as shown below)
Those impedances could be modified with different impedance values and/or structures, if necessary.
** Custom SAW IF Filters available. Contact Oscilent for assistance.
PACKAGE OUTLINE (mm)
TEST CIRCUIT
SOURCE AND LOAD IMPEDANCE: 50 ohm
INPUT: L1: TBD nH, C1: TBD pF L3: TBD nH
OUTPUT: L2: TBD nH, C2:TBD pF L4: TBD nH
FREQUENCY RESPONSE
Part No.:
809-IF85.38M-G

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map