IF SAW Filter
Part Number Package Application Last Modified
807-IF456.0M-A 7.0 x 5.0 SMD Mobile Communication January 2011

PART NUMBER :
807-IF456.0M-A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 455.7 456.0 456.3 MHz
Insertion Loss at Fo - 14.5 16.5 dB
Bandwidth at -3.0 dB 7.0 7.6 - MHz
Bandwidth at -40.0 dB - 12.6 14.0 MHz
Relative Attenuation - 
40 45 - dB
40 43 - dB
Temperature Coefficient - 0.03 - ppm/C
Source Impedance (Balanced)* - 200 - ohm
Load Impedance (Balanced)* - 200 - ohm
Amplitude Ripple - 1.0 1.5 dBp-p
Group Delay Variation - 120 200 ns
Operating Temperature -40 - +85 C
Absolute Delay at Fo - 0.520 1.0 µsec
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, F, G, H Ground
I In +
J In -
D Out +
E Out -

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
807-IF456.0M-A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map