IF SAW Filter
Part Number Package Application Last Modified
807-IF350.0M-B 7.0 x 5.0 SMD Mobile Communication Jan. 01, 2007
TYPE :
300.00 MHz IF SAW Filter

PART NUMBER :
807-IF350.0M-B
OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Minimum Typical Maximum Units
Center Frequency 349.0 350.0 350.1 MHz
Insertion Loss at Fo - 15.0 16.5 dB
Bandwidth at -0.5 dB 2.4 3.1 - MHz
Bandwidth at -3.0 dB - 4.8 - MHz
Bandwidth at -35.0 dB - 9.4 12.0 MHz
Relative Attenuation: -
38 43 - dB
38 43 - dB
Temperature Coefficient - 0.03 - ppm/C
Source Impedance (Single Ended)* - 50 - ohm
Load Impedance (Single Ended)* - 50 - ohm
Amplitude Ripple - 0.5 1.0 dBp-p
Group Delay Variation - 25 40 ns
Ambient Temperature - 25 - C
Absolute Delay at Fo - 0.45 - µsec
* With Matching Network (Ref. Testing Environment Circuit as shown) Modification to Impedance Values are possible if needed.
PACKAGE OUTLINE (mm)
TEST CIRCUIT
TEST FIXTURE AND VALUES/SOURCE AND LOAD IMPEDANCE 50 ohm
INPUT: L1: 51.7 nH; C1: 18pF
OUTPUT: L2: 48.5 nH; C2: 22pF
FREQUENCY RESPONSE
Part No.:
807-IF350.0M-B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map