IF SAW Filter
Part Number Package Application Last Modified
867-SL211.2M-20A 7.0 x 5.0 SMD IF SAW Filter January 2011

PART NUMBER :
867-SL211.2M-20A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 211.2 - MHz
Insertion Loss Fo - 17.6 19.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 9.42 MHz - 0.8 1.5 dB
Fo 10.00 MHz - 0.9 2.0
Group Delay Ripple Fo 9.42 MHz - 70 120 nsec
Temperature Coefficient - - -18 - ppm/C
Bandwidth -1 dB 18.84 20.84 - MHz
-40 dB - 27.66 29.00
Absolute Delay Fo - 0.68 - usec
Relative Attenuation 10.0MHz ~ 100.0MHz 50 - - dB 
100.0MHz ~ 168.0MHz 52 - -
168.0MHz ~ 196.5MHz 35 - -
250.0MHz ~ 270.0MHz 58 - -
270.0MHz ~ 350.0MHz 60 - -
350.0MHz ~ 1000.0MHz 45 - -
VSRW - - - 2.2 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
1, 2, 3, 5, 6, 7, 8, 9, 11, 12 Ground
10 Input
4 Output

 


TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
867-SL211.2M-20A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map