IF SAW Filter
Part Number Package Application Last Modified
867-SL192.0M-13A 7.0 x 5.0 SMD IF SAW Filter January 2011

PART NUMBER :
867-SL192.0M-13A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 191.8 192.0 192.2 MHz
Insertion Loss Fo - 12.2 13.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 5.25 MHz - 0.35 1.00 dB
Group Delay Ripple Fo 5.25 MHz - 27 80 nsec
Temperature Coefficient - - -18 - ppm/C
Bandwidth -1 dB 11.00 11.93 - MHz
-40 dB - 17.40 19.00
Absolute Delay Fo - 0.66 - usec
Relative Attenuation Fo 5.25 MHz - 0.35 1.00 dB 
Fo 7.50 ~ Fo 11.00 MHz 3 11 -
Fo 11.00 ~ Fo 58.00 MHz 40 46 -
Fo 58.00 ~ Fo 92.00 MHz 50 58 -
Return Loss - 12 - - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
1, 2, 3, 5, 6, 7, 8, 9, 11, 12 Ground
10 Input
4 Output

 


TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
867-SL192.0M-13A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map