IF SAW Filter
Part Number Package Application Last Modified
867-SL153.6M-20A 7.0 x 5.0 SMD IF SAW Filter January 2011

PART NUMBER :
867-SL153.6M-20A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 153.4 153.6 153.8 MHz
Insertion Loss Fo - 9.0 11.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -40 - +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 10.0 MHz - 0.65 1.00 dB
Group Delay Ripple Fo 10.0 MHz - 70 100 nsec
Temperature Coefficient - - -86 - ppm/C
Bandwidth -1 dB 20.0 23.5 - MHz
-3 dB - 24.9 -
-40 dB - 31.7 33.0
Absolute Delay Fo - 0.65 - usec
Relative Attenuation 1.0MHz ~ 80.0MHz 50 70 - dB 
80.0MHz ~ 105.0MHz 56 63 -
200.0MHz ~ 230.0MHz 56 63 -
230.0MHz ~ 1000.0MHz 40 70 -
VSWR - - - 2.0 : 1 -
Phase Linearity Fo 10.0 MHz - 3.0 5.0 rms
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
1, 2, 3, 5, 6, 7, 8, 9, 11, 12 Ground
10 Input
4 Output

 


TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
867-SL153.6M-20A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map