IF SAW Filter
Part Number Package Application Last Modified
835-IF98.0M-20A 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF98.0M-20A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 98.0 - MHz
Insertion Loss Fo - 21.8 23.5 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 10.0 MHz - 0.57 1.00 dB
Group Delay Ripple Fo 10.0 MHz - 39 80 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 20.35 20.55 - MHz
-3 dB - 20.90 -
-45 dB - 22.43 22.70
Absolute Delay Fo - 2.30 2.50 usec
Relative Attenuation Lower Sidelobe 50 55 - dB 
Upper Sidelobe 50 55 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF98.0M-20A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map