IF SAW Filter
Part Number Package Application Last Modified
835-IF90.1M-19A 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF90.1M-19A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 90.01 - MHz
Insertion Loss Fo - 27.8 30.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 9.42 MHz - 1.08 1.20 dB
Group Delay Ripple Fo 9.42 MHz - 40 80 nsec
Temperature Coefficient - - -18 - ppm/C
Bandwidth -1 dB 18.84 19.10 - MHz
-3 dB - 19.26 -
-50 dB - 20.11 -
Absolute Delay Fo - 3.6 - usec
Relative Attenuation Fo 10.0 ~ 10.8 MHz 24 33 - dB 
Fo 10.8 ~ 14.8 MHz 39 58 -
Fo 14.8 ~ 19.8 MHz 39 60 -
Fo 19.8 ~ 25.0 MHz 49 60 -
Ultimate Rejection - - 50 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF90.1M-19A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map