IF SAW Filter
Part Number Package Application Last Modified
835-IF85.0M-29A 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF85.0M-29A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 85.0 - MHz
Insertion Loss Fo - 26.8 30.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 14.52 MHz - 0.93 - dB
Group Delay Ripple Fo 14.52 MHz - 38.5 80.0 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 29.00 29.12 - MHz
-3 dB - 29.31 -
-40 dB - 30.2 30.5
Absolute Delay Fo - 3.3 - usec
Relative Attenuation Fo 15.1 ~ 15.9 MHz 24 45 - dB 
Fo 15.9 ~ 19.9 MHz 39 50 -
Fo 19.9 ~ 24.9 MHz 39 50 -
Fo 24.9 ~ 30.0 MHz 49 55 -
Ultimate Rejection - - 50 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF85.0M-29A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map