IF SAW Filter
Part Number Package Application Last Modified
835-IF82.8M-03A 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF82.8M-03A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 82.8 - MHz
Insertion Loss Fo - 24.0 26.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 1.92 MHz - 0.76 - dB
Group Delay Ripple Fo 1.92 MHz - 78 120 nsec
Temperature Coefficient - - -20 - ppm/C
Bandwidth -1 dB 3.84 4.00 - MHz
-3 dB - 4.16 -
-40 dB - 4.87 -
-50 dB - 4.93 5.00
Absolute Delay Fo - 5.16 - usec
Ultimate Rejection - 50 55 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF82.8M-03A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map