IF SAW Filter
Part Number Package Application Last Modified
835-IF75.0M-15C 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF75.0M-15C

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 74.9 75.0 75.1 MHz
Insertion Loss Fo - 26.5 28.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 7.56 MHz - 0.85 1.00 dB
Group Delay Ripple Fo 7.56 MHz - 64 120 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 15.20 15.40 - MHz
-3 dB - 15.58 -
-40 dB - 16.38 -
-50 dB - 16.43 16.50
Absolute Delay Fo - 3.83 - usec
Ultimate Rejection - 55 60 - dB
* Ultimate Rejection; Smoothing ON
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF75.0M-15C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map