IF SAW Filter
Part Number Package Application Last Modified
835-IF70.0M-30B 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF70.0M-30B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 69.9 70.0 70.1 MHz
Insertion Loss Fo - 28.0 30.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 14.42 MHz - 0.82 1.20 dB
Group Delay Ripple Fo 14.42 MHz - 45 80 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 29.00 29.10 - MHz
-3 dB 29.15 29.30 -
-40 dB - 30.37 30.45
Absolute Delay Fo - 3.10 - usec
Relative Attenuation Lower Sidelobe 54 60 - dB 
Upper Sidelobe 54 60 -
* Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF70.0M-30B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map