IF SAW Filter
Part Number Package Application Last Modified
835-IF70.0M-14C 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF70.0M-14C

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 70.0 - MHz
Insertion Loss Fo - 26.5 28.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple - - 0.65 1.00 dB
Group Delay Ripple - - 62 100 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 14.00 14.27 - MHz
-3 dB - 14.46 -
-40 dB - 15.26 15.40
-50 dB - 15.35 -
Absolute Delay Fo - 3.8 4.0 usec
Ultimate Rejection - 45 50 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF70.0M-14C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map