IF SAW Filter
Part Number Package Application Last Modified
835-IF70.0M-14B 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF70.0M-14B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 70.0 - MHz
Insertion Loss Fo - 25.5 28.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple - - 0.82 1.10 dB
Group Delay Ripple - - 86 150 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 13.84 14.00 - MHz
-3 dB - 14.20 -
-40 dB - 15.00 15.20
-50 dB - 15.10 -
Absolute Delay Fo - 3.75 4.00 usec
Ultimate Rejection - 45 50 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF70.0M-14B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map