IF SAW Filter
Part Number Package Application Last Modified
835-IF70.1M-119A 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF70.1M-119A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 70.05 70.10 70.15 MHz
Insertion Loss Fo - 23.5 24.5 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple - - 0.65 1.00 dB
Group Delay Ripple - - 50 100 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB - 19.00 - MHz
-3 dB 19.10 19.20 -
-50 dB - 20.18 20.23
Absolute Delay Fo - 3.27 - usec
Relative Attenuation Fo 10 MHz - 33 - dB 
Ultimate Rejection - 50 55 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF70.01M-119A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map