IF SAW Filter
Part Number Package Application Last Modified
835-IF70.0M-100A 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF70.0M-100A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 69.92 70.00 70.08 MHz
Insertion Loss Fo - 22.5 24.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple - - 0.65 1.00 dB
Group Delay Ripple - - 75 100 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 9.80 9.96 - MHz
-3 dB 10.00 10.17 -
-50 dB - 11.19 11.30
Absolute Delay Fo - 3.2 - usec
Ultimate Rejection - 52 60 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF70.0M-100A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map