IF SAW Filter
Part Number Package Application Last Modified
835-IF62.5M-19A 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF62.5M-19A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 62.5 - MHz
Insertion Loss Fo - 23.7 26.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 9.22 MHz - 0.6 1.0 dB
Group Delay Ripple Fo 9.22 MHz - 40 90 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 18.90 18.95 - MHz
-3 dB - 19.17 -
-40 dB - 20.15 20.20
Absolute Delay Fo - 2.91 - usec
Relative Attenuation Lower Sidelobe 50 52 - dB  
Upper Sidelobe 50 52 -
Fo 10.0 MHz 25 27 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF62.5M-19A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map