IF SAW Filter
Part Number Package Application Last Modified
835-IF61.0M-10B 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF61.0M-10B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 61.0 - MHz
Insertion Loss Fo - 23.2 26.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 28 dBm
Operating Temperature - 0 +45 +85 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 4.89 MHz - 0.52 1.00 dB
Phase Linearity Fo 4.89 MHz - 11.5 13.0 deg
Group Delay Ripple Fo 4.89 MHz - 53 90 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 10.15 10.33 - MHz
-45 dB - 11.45 11.60
Absolute Delay Fo - 3.7 4.0 usec
Relative Attenuation 10MHz ~ 50MHz 40 68 - dB 
@55.54 MHz 10 11 -
@55.64 MHz 5 6 -
@66.36 MHz 5 5.5 -
@66.46 MHz 10 10.5 -
70MHz ~ 180MHz 40 66 -
Input & Output Return Loss - 6.0 6.5 - -
Triple Transit Attenuation - 35 - - dBc
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF61.0M-10B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map