IF SAW Filter
Part Number Package Application Last Modified
835-IF61.0M-10A 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF61.0M-10A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 61.0 - MHz
Insertion Loss Fo - 20.90 23.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 28 dBm
Operating Temperature - -20 0 +70 C
Storage Temperature - -20 - +70 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 4.89 MHz - 0.6 1.0 dB
Group Delay Ripple Fo 4.89 MHz - 47 90 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 9.78 9.99 - MHz
-45 dB - 11.10 11.25
Input & Output Return Loss - - 2.3 - -
Triple Transit Attenuation - 35 - - dBc
Absolute Delay Fo - 3.7 4.0 usec
Relative Attenuation 10MHz ~ 50MHz 40 60 - dB 
@55.54 MHz 18 26 -
@55.64x MHz 10 16 -
@66.36 MHz 10 16 -
@66.46 MHz 18 27 -
70MHz ~ 180MHz 40 55 -
Phase Linearity Fo 4.89 MHz - 9 13 deg
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF61.0M-10A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map