IF SAW Filter
Part Number Package Application Last Modified
835-IF44.0M-05A 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF44.0M-05A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 43.95 44.00 44.05 MHz
Insertion Loss Fo - 25.0 26.5 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - 30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 2.7 MHz - 0.5 0.8 dB
Group Delay Ripple Fo 2.7 MHz - 60 100 nsec
Temperature Coefficient - - -94 - ppm/C
Bandwidth -1 dB 5.50 5.70 - MHz
-3 dB 5.80 5.88 -
-40 dB - 6.65 6.80
Absolute Delay Fo - 4.1 - usec
Ultimate Rejection - 45 50 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF44.0M-05A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map