IF SAW Filter
Part Number Package Application Last Modified
835-IF43.0M-06A 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF43.0M-06A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 43.0 - MHz
Insertion Loss Fo - 26.80 28.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 3.0 MHz - 0.45 0.90 dB
Group Delay Ripple Fo 3.0 MHz - 50 90 nsec
Temperature Coefficient - - -94 - ppm/C
Bandwidth -1 dB 6.30 6.50 - MHz
-3 dB - 6.85 -
-40 dB - 8.20 8.40
-50 dB - 8.30 8.50
Absolute Delay Fo - 2.61 - usec
Relative Attenuation Lower Sidelobe 50 55 - dB 
Upper Sidelobe 50 55 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF43.0M-06A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map