IF SAW Filter
Part Number Package Application Last Modified
835-IF43.75M-05A 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF43.75M-05A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 43.75 - MHz
Insertion Loss Fo - 24.0 26.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple 41.25 ~ 45.75 MHz - 0.5 0.8 dB
Group Delay Ripple 41.25 ~ 45.75 MHz - 80 120 nsec
Temperature Coefficient - - -94 - ppm/C
Bandwidth -1 dB 5.20 5.33 - MHz
-3 dB - 5.54 -
-40 dB - 6.32 6.50
Absolute Delay Fo - 4.15 - usec
Relative Attenuation 39.75 MHz 50 55 - dB 
47.25 MHz 50 55 -
Ultimate Rejection - 50 55 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF43.75M-05A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map