IF SAW Filter
Part Number Package Application Last Modified
835-IF198.5M-05A 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF198.5M-05A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 198.42 198.50 198.58 MHz
Insertion Loss Fo - 28.0 29.5 dB
Maximum DC Voltage - - - 15 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -25 - +70 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 2.575 MHz - 1.5 - dB
Group Delay Ripple Fo 2.575 MHz - 200 300 nsec
Temperature Coefficient - - -0.03 - ppm/C
Bandwidth -1 dB 5.10 5.18 - MHz
-1.5 dB - 5.22 -
-3 dB - 5.31 -
-35 dB - 5.82 5.90
-40 dB - 5.84 -
Absolute Delay Fo - 3.65 - usec
Ultimate Rejection - 45 48 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF198.5M-05A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map