IF SAW Filter
Part Number Package Application Last Modified
835-IF162.5M-14B 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF162.5M-14B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 162.5 - MHz
Insertion Loss Fo - 26.37 28.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 28 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -20 - +70 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 7.09 MHz - 0.96 1.00 dB
Group Delay Ripple Fo 7.09 MHz - 57 100 nsec
Temperature Coefficient - - -20 - ppm/C
Bandwidth -1 dB - 14.86 - MHz
-45 dB - 16.18 16.50
Absolute Delay Fo - 3.4 4.2 usec
Relative Attenuation 10MHz ~ 150MHz 40 75 - dBc
@154.84 MHz 5 5 -
@154.94 MHz 0.5 2 -
@170.06 MHz 0.5 4 -
@170.16 MHz 5 7 -
175MHz ~ 300MHz 40 65 -
Input & Output Return Loss - 6.0 9.5 - dB
Phase Linearity Fo 7.09 MHz - 13 - deg
Triple Transit Attenuation - 35 - - dBc
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF162.5M-14B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map