IF SAW Filter
Part Number Package Application Last Modified
835-IF160.0M-12B 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF160.0M-12B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 160.0 - MHz
Insertion Loss Fo - 26.32 28.50 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -20 - +70 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 6.25 MHz - 0.62 1.20 dB
Group Delay Ripple Fo 6.25 MHz - 66 100 nsec
Temperature Coefficient - - -18 - ppm/C
Bandwidth -1 dB 12.60 12.73 - MHz
-3 dB - 12.91 -
-10 dB - 13.22 13.28
-20 dB - 13.45 -
-25 dB - 13.53 -
-35 dB - 13.66 -
Absolute Delay Fo - 4.4 4.6 usec
Relative Attenuation Out of Gain 400KHz 8 12 - dB  
Out of Gain 600KHz 20 35 -
Out of Gain 1MHz 45 54 -
Out of Gain 5MHz 50 60 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:

835-IF160.0M-12B


Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map