IF SAW Filter
Part Number Package Application Last Modified
835-IF160.0M-09C 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF160.0M-09C

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 160.0 - MHz
Insertion Loss Fo - 24.5 26.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -20 - +70 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 4.59 MHz - 0.76 1.00 dB
Group Delay Ripple Fo 4.59 MHz - 62 100 nsec
Temperature Coefficient - - -20 - ppm/C
Bandwidth -1 dB 9.65 9.79 - MHz
-45 dB - 11.03 11.25
Absolute Delay Fo - 3.84 4.00 usec
Relative Attenuation 10MHz ~ 150MHz 40.0 64.0 - dB 
@154.84 MHz 2.0 7.8 -
@154.94 MHz 2.0 4.1 -
@165.06 MHz 2.0 4.0 -
@165.16 MHz 7.0 7.7 -
170MHz ~ 300MHz 40 64 -
Input & Output Return Loss - 6 8 - dB
Phase Linearity Fo 4.59 MHz - 11.7 13.0 nsec
Triple Transit Attenuation - 35 - - dBc
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF160.0M-09C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map