IF SAW Filter
Part Number Package Application Last Modified
835-IF160.0M-09B 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF160.0M-09B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 160.0 - MHz
Insertion Loss Fo - 25.8 26.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -20 - +70 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 4.59 MHz - 0.56 1.00 dB
Group Delay Ripple Fo 4.59 MHz - 58 100 nsec
Temperature Coefficient - - -20 - ppm/C
Bandwidth -1 dB 9.90 10.05 - MHz
-45 dB - 11.26 11.50
Absolute Delay Fo - 3.85 4.00 usec
Relative Attenuation 10MHz ~ 150MHz 40.0 72.0 - dBc
@154.84 MHz 2.0 3.0 -
@154.94 MHz 2.0 1.1 -
@165.06 MHz 2.0 1.8 -
@165.16 MHz 7.0 4.3 -
170MHz ~ 300MHz 40.0 64.0 -
Phase Linearity Fo 4.59 MHz - 12.7 13.0 deg
Input & Output Return Loss single ended * 6 7 - dB
Triple Transit Attenuation - 35 - - dBc
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF160.0M-09B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map