IF SAW Filter
Part Number Package Application Last Modified
835-IF145.0M-10B 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF145.0M-10B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 145.0 - MHz
Insertion Loss Fo - 25.40 27.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 4.52 MHz - 0.75 1.00 dB
Group Delay Ripple Fo 4.52 MHz - 80 120 nsec
Temperature Coefficient - - -18 - ppm/C
Bandwidth -1 dB 9.04 9.18 - MHz
-3 dB - 9.40 -
-50 dB - 10.35 10.50
Absolute Delay Fo - 3.6 - usec
Relative Attenuation Fo 5.1 ~ Fo 5.9 MHz - 24 - dB 
Fo 5.9 ~ Fo 9.9 MHz 39 48 -
Fo 9.9 ~ Fo 14.9 MHz 39 50 -
Fo 14.9 ~ Fo 20.0 MHz 49 62 -
Ultimate Rejection - - 50 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF145.0M-10B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map