IF SAW Filter
Part Number Package Application Last Modified
835-IF140.0M-09A 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF140.0M-09A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 140.0 - MHz
Insertion Loss Fo - 25.6 28.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 4.35 MHz - 0.55 1.00 dB
Group Delay Ripple Fo 4.35 MHz - 49 100 nsec
Temperature Coefficient - - -20 - ppm/C
Bandwidth -1 dB 9.10 9.25 - MHz
-3 dB - 9.45 9.70
-15 dB - 9.95 10.10
-40 dB - 10.30 10.50
-50 dB - 10.40 10.70
Absolute Delay Fo - 4.21 - usec
Ultimate Rejection - 50 55 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF140.0M-09A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map