IF SAW Filter
Part Number Package Application Last Modified
835-SL128.0625M-04B 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-SL128.0625M-04B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 129.47 129.57 129.67 MHz
Insertion Loss Fo - 25.2 26.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 28 dBm
Operating Temperature - 0 +45 +85 C
Storage Temperature - -20 - +70 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 2.07 MHz - 0.54 1.10 dB
Group Delay Ripple Fo 2.07 MHz - 93 150 nsec
Temperature Coefficient - - -0.03 - ppm/C
Bandwidth -1 dB 4.25 4.37 - MHz
-45 dB - 5.12 5.30
Absolute Delay Fo - 3.96 4.20 usec
Relative Attenuation 10MHz ~ 122MHz 40 62 - dB 
@126.93 MHz 40 65 -
@127.03 MHz 20 40 -
@132.11 MHz 20 35 -
@132.21 MHz 40 50 -
137MHz ~ 300MHz 40 64 -
Input & Output Return Loss - 6 8 - dB
Phase Linearity Fo 2.07 MHz - 3.4 10.0 deg
Triple Transit Attenuation - 35 - - dBc
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-SL128.0625M-04B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map