IF SAW Filter
Part Number Package Application Last Modified
835-IF125.0M-30B 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF125.0M-30B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 125.0 - MHz
Insertion Loss Fo - 28.40 30.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 14.52 MHz - 0.98 - dB
Group Delay Ripple Fo 14.52 MHz - 55 100 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 29.04 29.24 - MHz
-3 dB - 29.45 -
-50 dB - 30.45 30.65
Absolute Delay Fo - 3.0 - usec
Relative Attenuation Fo 15.1 ~ Fo 15.9 MHz - 24 - dB 
Fo 15.9 ~ Fo 19.9 MHz 39 52 -
Fo 19.9 ~ Fo 24.9 MHz 39 52 -
Fo 24.9 ~ Fo 30.0 MHz 49 52 -
Ultimate Rejection - - 50 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF125.0M-30B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map