IF SAW Filter
Part Number Package Application Last Modified
835-IF117.5M-14C 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF117.5M-14C

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 117.40 117.50 117.65 MHz
Insertion Loss Fo - 24.5 26.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -20 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 7.09 MHz - 0.71 1.70 dB
Group Delay Ripple Fo 7.09 MHz - 46 100 nsec
Temperature Coefficient - - -20 - ppm/C
Bandwidth -1 dB 14.45 14.63 - MHz
-45 dB - 15.92 16.10
Absolute Delay Fo - 4.05 4.20 usec
Relative Attenuation 10MHz ~ 105MHz 40.0 63.0 - dB     
@109.84 MHz 8.0 11.9 -
@109.94 MHz 3.0 6.7 -
@125.06 MHz 3.0 5.7 -
@125.16 MHz 8.0 10.0 -
130MHz ~ 300MHz 40.0 63.0 -
Input & Output Return Loss - 6 7 - dB
Triple Transit Atenuation - 35 - - dBc
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF117.5M-14C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map