IF SAW Filter
Part Number Package Application Last Modified
835-IF117.5M-14B 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF117.5M-14B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 117.5 - MHz
Insertion Loss Fo - 26.41 30.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -20 - +70 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 7.09 MHz - 0.64 1.00 dB
Group Delay Ripple Fo 7.09 MHz - 44 180 nsec
Temperature Coefficient - - -20 - ppm/C
Bandwidth -1 dB 14.65 14.74 - MHz
-45 dB - 16.05 16.20
Absolute Delay Fo - 3.97 4.20 usec
Relative Attenuation 10MHz ~ 105MHz 40 64 - dBc
@109.84 MHz 8 9 -
@109.94 MHz 3 5 -
@125.06 MHz 3 5 -
@125.16 MHz 8 9 -
130MHz ~ 300MHz 40 58 -
Input & Output Return Loss - 6.00 7.35 - dB
Phase Linearity Fo 7.09 MHz - 9.8 13.0 deg
Triple Transit Attentuation - 35 - - dBc
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF117.5M-14B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map