IF SAW Filter
Part Number Package Application Last Modified
835-IF115.0M-18A 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF115.0M-18A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 114.9 115.0 115.1 MHz
Insertion Loss Fo - 29.5 32.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple - - 0.6 1.0 dB
Group Delay Ripple - - 45 80 nsec
Temperature Coefficient - - -18 - ppm/C
Bandwidth -1 dB 18.40 18.45 - MHz
-3 dB 18.60 18.65 -
-40 dB - 19.50 19.60
-50 dB - 19.60 19.75
Absolute Delay Fo - 4.37 - usec
Ultimate Rejection - 50 55 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF115.0M-18A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map