IF SAW Filter
Part Number Package Application Last Modified
835-IF115.0M-12A 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF115.0M-12A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 115.0 - MHz
Insertion Loss Fo - 25.50 27.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - 20 - 70 C
Storage Temperature - 20 - 70 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 6.25 MHz - 0.55 1.00 dB
Group Delay Ripple Fo 6.25 MHz - 55 100 nsec
Temperature Coefficient - - -18 - ppm/C
Bandwidth -1 dB 12.60 12.65 - MHz
-3 dB - 12.88 -
-10 dB - 13.25 13.30
-20 dB - 13.52 -
-25 dB - 13.60 -
-35 dB - 13.70 -
Absolute Delay Fo - 4.31 - usec
Relative Attenuation Out of Gain 400KHz 7 10 - dB 
Out of Gain 600KHz 20 30 -
Out of Gain 1MHz 45 55 -
Out of Gain 5MHz 50 60 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF115.0M-12A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map