IF SAW Filter
Part Number Package Application Last Modified
835-IF115.0M-09B 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-IF115.0M-09B

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 115.0 - MHz
Insertion Loss Fo - 22.2 26.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 28 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -20 - +70 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 4.59 MHz - 0.63 1.00 dB
Group Delay Ripple Fo 4.59 MHz - 68 100 nsec
Temperature Coefficient - - -20 - ppm/C
Bandwidth -1 dB 9.45 9.58 - MHz
-45 dB - 10.88 11.05
Absolute Delay Fo - 3.96 4.20 usec
Relative Attenuation 10 MHz ~ 105 MHz 40 67 - dBc
@109.84 MHz 10 13 -
@ 109.94 MHz 5 8 -
@ 120.06 MHz 5 7 -
@ 120.16 MHz 10 11 -
125 MHz ~ 300 MHz 40 78 -
Phase Linearity Fo 4.59 MHz - 9.5 13.0 deg
Input & Output Return Loss - - 11.7 - -
Triple Transit Attenuation - 35 - - dBc
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-IF115.0M-09B

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map