IF SAW Filter
Part Number Package Application Last Modified
835-SL100.5M-03A 35.0 x 12.8 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
835-SL100.5M-03A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 100.5 - MHz
Insertion Loss Fo - 23.5 25.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 28 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -20 - +70 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 1.44 MHz - 0.50 1.10 dB
Group Delay Ripple Fo 1.44 MHz - 147 180 nsec
Temperature Coefficient - - -0.03 - ppm/C
Bandwidth -1 dB 2.88 3.07 - MHz
-45 dB - 3.75 4.00
Absolute Delay Fo - 4.78 4.85 usec
Relative Attenuation 10 MHz ~ 95 MHz 45 55 - dBc
@98.49 MHz 40 56 -
@98.59 MHz 33 52 -
@102.41 MHz 33 52 -
@102.51 MHz 40 52 -
105 MHz ~ 300 MHz 45 47 -
Phase Linearity Fo 1.44 MHz - 6.5 10 deg
Input & Output Return Loss - - 9.0 - dB
Triple Transit Attenuation - 35 - - dBc
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, D, F Ground
A In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
835-SL100.5M-03A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map