IF SAW Filter
Part Number Package Application Last Modified
827-IF140.0M-48A 27.2 x 12.6 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
827-IF140.0M-48A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 140.0 - MHz
Insertion Loss Fo - 23.0 25.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 2.2 MHz - 0.4 1.0 dB
Group Delay Ripple Fo 2.2 MHz - 100 150 nsec
Temperature Coefficient - - -23 - ppm/C
Bandwidth -1 dB - 4.80 - MHz
-3 dB 5.00 5.07 -
-40 dB - 6.32 6.38
Absolute Delay Fo - 3.2 - usec
Relative Attenuation Lower Sidelobe 60 65 - dB 
Upper Sidelobe 60 65 -
138.125 MHz - 1.625 MHz 65 70 -
141.875 MHz + 1.625 MHz 65 70 -
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, E, F Ground
A In
D Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
827-IF140.0M-48A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map