IF SAW Filter
Part Number Package Application Last Modified
827-IF140.0M-143A 27.2 x 12.6 Thru Hole Base Station & Repeater January 2011

PART NUMBER :
827-IF140.0M-143A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 140.0 - MHz
Insertion Loss Fo - 27.0 28.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 6.875 MHz - 0.4 1.0 dB
Group Delay Ripple Fo 6.875 MHz - 40 100 nsec
Temperature Coefficient - - -23 - ppm/C
Bandwidth -1 dB - 14.30 - MHz 
-3 dB 14.55 14.67 -
-40 dB - 16.20 16.30
Relative Attenuation Lower Sidelobe 55 60 - dB
Upper Sidelobe 55 60 -
Fc 8.5MHz 60 65 -
Absolute Delay Fo - 3.30 - usec
* No Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
B, C, E, F Ground
A In
D Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
827-IF140.0M-143A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map