IF SAW Filter
Part Number Package Application Last Modified
821-IF85.1M-20C 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-IF85.1M-20C

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 85.1 - MHz
Insertion Loss Fo - 23.7 25.5 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 9.42 MHz - 0.56 0.90 dB
Group Delay Ripple Fo 9.42 MHz - 35 60 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 19.80 20.06 - MHz
-10 dB - 20.94 -
-20 dB - 21.35 -
-40 dB - 21.78 21.95
Absolute Delay Fo - 2.11 - usec
Ultimate Rejection - 50 53 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-IF85.1M-20C

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map