IF SAW Filter
Part Number Package Application Last Modified
821-IF75.0M-27A 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-IF75.0M-27A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 75.0 - MHz
Insertion Loss Fo - 26.50 28.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 12.48 MHz - 0.40 0.95 dB
Group Delay Ripple Fo 12.48 MHz - 21 - nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB - 27.12 - MHz
-3 dB 27.50 27.64 -
-30 dB - 29.42 29.52
-50 dB - 29.85 -
Absolute Delay Fo - 1.65 - usec
Ultimate Rejection - - 52 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-IF75.0M-27A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map