IF SAW Filter
Part Number Package Application Last Modified
821-IF75.0M-11A 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-IF75.0M-11A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 75.0 - MHz
Insertion Loss Fo - 20.5 23.5 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - 0 - +60 C
Storage Temperature - -20 - +70 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 5.5 MHz - 0.56 1.00 dB
Group Delay Ripple Fo 5.5 MHz - 42 100 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 11.00 11.65 - MHz
-30 dB - 13.13 -
-45 dB - 13.40 15.00
Absolute Delay Fo - 2.4 - usec
Relative Attenuation Fo 6.5 MHz - 24 - dB 
Fo 7.5 MHz - 55 -
Ultimate Rejection - - 55 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-IF75.0M-11A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map