IF SAW Filter
Part Number Package Application Last Modified
821-SL70.0M-20B 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-IF75.0M-09A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 75.0 - MHz
Insertion Loss Fo - 19.7 22.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 4.6 MHz - 0.42 0.90 dB
Group Delay Ripple Fo 4.6 MHz - 60 120 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB - 9.82 - MHz
-55 dB - 11.90 -
Absolute Delay Fo - 2.4 - usec
Ultimate Attenuation 65.1 ~ 96.0 MHz 50 55 - dB 
81.0 ~ 84.9 MHz 50 60 -
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-IF75.0M-09A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map