IF SAW Filter
Part Number Package Application Last Modified
821-IF74.9875M-10A 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-IF74.9875M-10A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 74.9875 - MHz
Insertion Loss Fo - 20.0 23.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - 0 - +60 C
Storage Temperature - -20 - +70 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 4.6875 MHz - 0.46 1.00 dB
Group Delay Ripple Fo 4.6875 MHz - 50 100 nsec
Temperature Coefficient - - x - ppm/C
Bandwidth -1 dB 9.375 10.00 - MHz
-30 dB - 11.50 -
-40 dB - 11.65 12.10
Absolute Delay Fo - 2.32 - usec
Relative Attenuation Fo 5.9125 MHz 30 50 - dB 
Ultimate Rejection - - 50 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-IF74.9875M-10A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map