IF SAW Filter
Part Number Package Application Last Modified
821-IF70.0M-R 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-IF70.0M-R

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 69.9 70.0 70.1 MHz
Insertion Loss Fo - 13.5 16.0 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -55 - +85 C
Storage Temperature - -55 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple Fo 100 KHz - 1.2 1.5 dB
Group Delay Ripple - - 300 1000 nsec
Temperature Coefficient - - -0.03 - ppm/C
Bandwidth -1 dB 0.12 0.18 - MHz
-3 dB 0.20 0.34 -
-40 dB - 1.10 1.20
Absolute Delay Fo - 2.63 - usec
Ultimate Attenuation - 60 65 - dB 
Ultimate Rejection - 45 50 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-IF70.0M-R

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map