IF SAW Filter
Part Number Package Application Last Modified
821-SL70.0M-20B 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-IF65.43M-03A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - 65.35 65.43 65.51 MHz
Insertion Loss Fo - 22.00 23.00 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -30 - +80 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Amplitude Ripple - - 0.45 0.95 dB
Group Delay Ripple - - 60 120 nsec
Temperature Coefficient - - -20 - ppm/C
Bandwidth -1 dB - 3.95 - MHz
-3 dB 4.10 4.30 -
-50 dB - 5.70 5.90
Absolute Delay Fo - 2.11 - usec
Ultimate Rejection - 50 53 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-IF65.43M-03A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map