IF SAW Filter
Part Number Package Application Last Modified
821-IF50.0M-19A 20 x 9.8 SMD IF SAW Filter January 2011

PART NUMBER :
821-IF50.0M-19A

Click for Full Spec (PDF)

OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS
PARAMETERS Condition Minimum Typical Maximum Units
Center Frequency - - 50.0 - MHz
Insertion Loss Fo - 27.7 29.5 dB
Maximum DC Voltage - - - 10 V
Maximum Input Power - - - 10 dBm
Operating Temperature - -20 - +70 C
Storage Temperature - -40 - +85 C
Source Impedance single ended * - 50 - ohm
Load Impedance single ended * - 50 - ohm
Passband Ripple Fo 9.32 MHz - 0.58 1.00 dB
Group Delay Ripple Fo 9.32 MHz - 26 60 nsec
Temperature Coefficient - - -72 - ppm/C
Bandwidth -1 dB 19.30 19.47 - MHz
-3 dB - 19.99 -
-20 dB - 21.34 -
-40 dB - 21.94 22.10
Absolute Delay Fo - 1.95 - usec
Ultimate Rejection - 45 48 - dB
* With Matching Network. Ref pdf spec.
PACKAGE OUTLINE (mm)

PIN LAYOUT
A, B, C, D, F, G, H, I Ground
J In
E Out

TEST FIXTURE and GRAPHS available on PDF.
See FULL PDF SPECIFICATION

Part No.:
821-IF50.0M-19A

Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator
Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map